The left dial sets the redline but to adjust the yellow zone press S2 then make adjustments. You need to set the Redzone first before setting the yellow zone size as changing redline adjusts the yellow zone proportionally to prevent graphic glitches.

[S6 Short Press] Engine Number Selection

Press to toggle engine selection (mode 1 only as below)

 

[S6 Long Press] Needle Function Mode

Long press to toggle engine output functions.

     1) Only one needle shown for the selected engine. [S6 Short Press] to change engine selection.

     2) Multi Needle - one needle for each engine.

 

[L Dial] Redline adjust & Value Down/Up:

 

[R Dial] Menu Activate & Left/Right:

     Instructions Page (Off = 0, On = 1)

 

     Menu Item Index (0 to 9)

     0 = Menu Closed

     1 = Version & Info

     2 = Side Buttons

     3 = Engine Number Selection

     4 = Dial Range

     5 = Glass Reflection

     6 = Background Colour

     7 = LCD - LED - Custom Colours

     8 = Brightness Control

     9 = Panel Lights Control

 

     Edit Red or Yellow Zone Toggle (Red = 0, Yellow = 1)

 

     Selected Engine Number 1 - 4 (0 to 3)

     0 = Engine 1

     1 = Engine 2

     2 = Engine 3

     3 = Engine 4

 

     Offset from Redzone (0 to 120)

 

     Toggle bewteen two dial ranges (0 to 1)

     0 = Range 0 - 50

     1 = Range 0 - 70

 

     Redzone end point adjustment (-120 to 150)

 

 

 

     Side Button Labels (Off = 0, On = 1)

 

     Side Buttons (Off = 0, On = 1)

 

     Foreground colour of fonts while power is on (default = "#dd0000")

 

     Background colour of fonts while power is on (default = "#000000")

 

     Foreground colour of fonts while power is off (default = "#000000")

 

     Background colour of fonts while power is off (default = "#000000")

 

     Foreground colour of fonts while power is on (default = "#00DD00")

 

     Background colour of fonts while power is on (default = "TRANSPARENT")

 

     Foreground colour of fonts while power is off (default = "#001100")

 

     Background colour of fonts while power is off (default = "TRANSPARENT")

 

     Side panel LED Style Index (1 - 3)

     1 = LED Style

     2 = LCD Style (Default)

     3 = Custom

  

FG_MANIFOLD_PRESSURE_ENG1 (Session)

FG_MANIFOLD_PRESSURE_ENG2 (Session)

FG_MANIFOLD_PRESSURE_ENG3 (Session)

FG_MANIFOLD_PRESSURE_ENG4 (Session)

 

SIMCONNECT Vars Used:

ENG MANIFOLD PRESSURE:1,inhg

ENG MANIFOLD PRESSURE:2,inhg

ENG MANIFOLD PRESSURE:3,inhg

ENG MANIFOLD PRESSURE:4,inhg

NUMBER OF ENGINES,Number

 

(not all vars used in every gauge)

 

     Variable used for dial acceleration (Off = 0, On = 1)

 

     Brightness value of physical FIP's. Affects all physical gauges (20-250)

 

     Glass Reflection (Off = 0, On = 1)

 

     Toggle visibility of Mini Menu LED (0 = On, 1 = Off)

 

     Background Colour (0 to 3)

     1 = Grey panel with grey gauge face

     2 = Blue grey panel with grey gauge face

     3 = Dark grey panel with black gauge face

     4 = Dark blue panel with black gauge face.  

 

     Background Colour (Black = 0, Blue = 1 )

 

     Minimum voltage before gauge electronics turns off (-1 to 150)

     -1 = Disabled

     0 - 150 = Off Voltage Level

 

     Internal Variable - Used to store off voltage value - do not edit

  

     Night Lit Mode (Off = 0, On = 1)

 

     Shared variable for switching inHg and MB (0 to 1)

     0 = inHg

     1 = Millbars

 

  Background Colour (0 to 6)

     0 = Grey

     1 = Black Dial Face

     2 = Darker Gauge & Dial Face

     3 = Black & No Gauge GFX

     4 = Grey - Original Design

     5 = Black Dial Face - Original Design

     6 = Darker Gauge & Dial Face - Original Design

   

     Internal variable used to read current voltage

 

1.5.000

     - 1) SPAD.neXt 0.9.15 Compatibility (Convert "PRESS" to "PRESSSHORT") Fixes short and long press both firing on long press.

     - 2) Menu system upgraded

     - 3) New gauge brightness code using SPAD brightness variables.

     - 4) Can control global or individual gauge brightness in gauge (Profile saved settings)

     - 5) Better use of button lights

     - 6) Added Engine Selection to menu

     - 7) Added Dial Range Toggle to Menu

     - 8) Added Custom Colour for blanking plate - Edit colour index for variable FG_GLOBAL_BLANKING_COLOUR

1.4.000 - Added yellow zone adjustment (S2 to toggle). SPAD.neXt 0.9.13 Compatibility (Author ID)

1.3.004 - Fixed bug dial face not changing

1.3.003

     1) New Custom Virtual Power supports ALL aircraft volt variables - See https://fipgauges.com/customfeatures.php

     2) Added extended Pressure range  0 - 70. Toggle with [S4] Button

1.3.002 - Added sidebar blanking plate option.

1.3.001 - Virtual Power Warning added to Menu

1.3.000 - Added New Gauge Design and Panel Lighting control in Mini Menu

1.2.002 - Support for NEW 4 colour hue panel lights.

1.2.001 - Tweaked voltage monitoring to better support MSFS2020. Added Monitoring for Battery Bus1.2.000 - SPAD.neXt 0.9.7.x Custom LED Foreground and Background Colours.

1.1.002 - Added Brightness Control to Mini Menu. Automatic Dial Acceleration

1.1.001 - Lower adjustment on redzone

1.1.000 - Panel Lights now controlled by local variable (FG_GLOBAL_PANEL_LIGHTS) 0=Off 1=On

1.0.002 - Fixed Bug where two needles would appear on a single engine aircraft (A2A)

1.0.001 - Added A2A compatibility and multi needle mode engine split for displaying on two FIPs as two pairs of needles

1.0.000 - First Public Beta Release